Re: getting the 57cnc to work with G540

Post by **ArtF** » Thu Apr 07, 2016 3:05 am

Maynard:

Some of the API's did change and they may be causing a loop. When you get a chance, see if you can figure out which one it is and send me the library..I can probably stop the loop..

Thx
Art

MaynardC · Post by **MaynardC** » Thu Apr 07, 2016 3:53 am

I added the folders back to the script folder one by one, starting with default Auggie libraries, than onto my custom libs. Ran fine at each step, and now loads fine back at the original state. Sorry to interrupt this thread, but all seems fine now.

Maynard

Post by **ArtF** » Thu Apr 07, 2016 4:22 am

No sweat:

  It may be it simply was resetting to some new defaults. Ive been adding many fixes and reliability updates as I use it and find things that annoy or don't work.

Art

Post by **ArtF** » Sun Apr 10, 2016 12:18 am

Thought Id show my wiring.. for those that have asked about plugs and such..

:)

Art

DanL · Post by **DanL** » Sun Apr 10, 2016 12:02 pm

Hi art M30 is still not working the log does not show anything, I ran with the scripter open it comes up that it is blocked.

I ran it with a couple different G codes

Post by **ArtF** » Sun Apr 10, 2016 1:19 pm

Hi Dan:

  Thx, Ill keep trying to find out why, M30 works here with no problem.

  Im curious, if you put a line after the m30 , does it get executed?

Art

DanL · Post by **DanL** » Sun Apr 10, 2016 2:58 pm

yer I tried that M5 then M30 no different even had M5 go to the Axis zeros then M30. it stop's 3 lines before M30. new profile as well.  I have to have a sit down with the machine and see if I can find it my end, but I have a router to go fix some one did not watch where they where walking

Post by **ArtF** » Sun Apr 10, 2016 3:10 pm

Dan:

  Are you sure it updated to 1.45? It did used to stop 3 lines before the m30..

Art

DanL · Post by **DanL** » Sun Apr 10, 2016 5:24 pm

yep just checked I will do a uninstall and reinstall see if that helps

DanL · Post by **DanL** » Sun Apr 10, 2016 7:26 pm

reinstall did not help
 

Post by **ArtF** » Mon Apr 11, 2016 12:17 am

Dan:

Never does.. Nothing I write usually needs a uninstall..

hmm, ok, Ill run some tests to see if I can see why. Anythign special in the
program or does any sequence ending in M30 just fail to rewind?

Art

Post by **ArtF** » Mon Apr 11, 2016 8:00 am

Dan:

Found it I think.. Ill release a fix soon, it explains the failure on the M calls.

I notice too, like m3, it fails to rewind if there is no following line, so Im tacking that down as well..

Art

Post by **ArtF** » Mon Apr 11, 2016 8:20 am

Dan:

  Rewind is fixed, download version 1.46 online now.

Thx for the bug
Art

chicoxiba · Post by **chicoxiba** » Tue Apr 12, 2016 11:42 pm

Yes the M calls are all going now. I get no more crashes. SWEET.

Just noticed if I type 1000 at the FRO field.. the code runs fast, I mean fast. But even with a low jerk setting it seems it gets too quick around the corners.

f

Post by **ArtF** » Wed Apr 13, 2016 12:33 am

>>Just noticed if I type 1000 at the FRO field.. the code runs fast, I mean fast.

  lol, Feedrate override is designed to be limited to 0 - 100 %, I didnt set a routine to clip it,
Im surprised it worked, but as it realy controls time, if over 100 you risk going too fast
for your system and Jerk will be 10 times more than set for example.. so I suppose if one
knows it will work you could go to liek 110% or may 140%, but 1000? ..yeah, that'd be fast
alright.. lol

Art

GearHeads Corner