Inlay done with Auggie, Vexx and Gearotic CAD

[BobL]

Hi;

Here's the result of a few inlay test examples we come up with over the last few weeks, results are pretty good in my opinion. Thought I'd share with everyone to see.

Cheers
Bob

[John T]

Having done some of this inlay work I know the effort required - Congratulations

[tweakie]

Excellent work Bob.

[BobL]

Was Art and I actually, but thanks guys.

Cheers
Bob

[tweakie]

Excellent work Bob and Art.  ;D

Tweakie.

[TOTALLYRC]

The Zebra inlay is very nice. Maybe when I grow up I will be able to do it as nicely as you have.


Mike

[ArtF]

Mike:

  Before you get the idea we dealt with tweezers and lots of parts, heres how the Zebra was made.

1) Engrave B&W photo of zebras into wood. 12 minutes.
2) Flip and reverse image and burn into a piece if 1mm veneer to 3/4mm deep ( picture shows result).
3) Apply glue and push veneer into wood. Let dry.
4) Sand away 1/4mm of veneer.

:)
Art