Re: Vexx version 1.21 released with Guilloche wizard
Posted: Sun Mar 03, 2019 5:18 am
Hi Art,
Even if you will never mill a guilloche ?, looking what the module in Vexx is capable of..., is a big joy !
Nevertheless..., today I made one and milled it: Alu, rpm 15000, F 30, V cutter incl. angle 60, depth 0,1 mm, diameter 39 mm. See attached photo.
The program seems not to accept negative Z values. So with find and replace all solved. May be you want to change that ?
The sliders in the menu are sometimes difficult to move to an exact position (value). May be the possibility to enter the numbers by keyboard (just like in MACH3) could be useful ?
Thanks again for this great module !
Hessel
Even if you will never mill a guilloche ?, looking what the module in Vexx is capable of..., is a big joy !
Nevertheless..., today I made one and milled it: Alu, rpm 15000, F 30, V cutter incl. angle 60, depth 0,1 mm, diameter 39 mm. See attached photo.
The program seems not to accept negative Z values. So with find and replace all solved. May be you want to change that ?
The sliders in the menu are sometimes difficult to move to an exact position (value). May be the possibility to enter the numbers by keyboard (just like in MACH3) could be useful ?
Thanks again for this great module !
Hessel