Version 2.298 online.
Re: Version 2.298 online.
Kirk:
Sounds like all the updates worked. :)
Have fun
Art
Sounds like all the updates worked. :)
Have fun
Art
Re: Version 2.298 online.
I tried both cameras. One is RGB and the other is YUY2. They both work!
I really like the YUY2 because it has better focusing.
Is there any plans to incorporate a external structured light source similar to the little one I emailed you off line?
Dan Mauch
ArtF wrote: Hi All:
Version 2.2987 is online with both RGB, and YUY2 video types. I also found what Im pretty sure was the issue people
were having. This should now work with the majority of cameras I think.. Ive noticed most have both, or at least 1 o these formats.
Thx
Art
Re: Version 2.298 online.
Dan:
In the fall, Ill probably offer some sort of way to trigger an external light source.. or to load photos from any source you wish..
Or at least thats the plan.. I just wanted ot get it running for the summer so people coudl play with it, in the fall we'll have
a better of idea of what can be done.
Art
In the fall, Ill probably offer some sort of way to trigger an external light source.. or to load photos from any source you wish..
Or at least thats the plan.. I just wanted ot get it running for the summer so people coudl play with it, in the fall we'll have
a better of idea of what can be done.
Art
Re: Version 2.298 online.
OK. I'm pretty proud of this one finished with a 1/8 " ball. It is sooooo Cool!
Karl
Karl
Re: Version 2.298 online.
Karl:
Congrats, that looks excellent. My workshop is only now getting ready so I can cut my own.
You guys are all beating me to the punch.. I gotta learn to hold code back till I get to cut. :)
Seriously , great work..
Art
Congrats, that looks excellent. My workshop is only now getting ready so I can cut my own.
You guys are all beating me to the punch.. I gotta learn to hold code back till I get to cut. :)
Seriously , great work..
Art
Re: Version 2.298 online.
nice job Karl, fun to see isn't it?
Art... if you didn't live so close the the NorthPole and Santa ;D
or you could dig a tunnel to your workshop.
Art... if you didn't live so close the the NorthPole and Santa ;D
or you could dig a tunnel to your workshop.
Re: Version 2.298 online.
:)
Coldest spring I think Ive ever seen.. .. :)
Art
Coldest spring I think Ive ever seen.. .. :)
Art
Re: Version 2.298 online.
Thanks Ya-Nvr-No
I just can't put it down. I stare and stare and keep thinking to myself. It just can't be done, I know it can't be done, but there it is. Thanks again Art for not holding back the code. I think, just maybe Art is thinking the same thing, "it just can't be done". It's going to church with me tomorrow. There will be some guys there that will be very impressed! A couple of weeks ago I gave a short talk in which I quoted Art. And said when was the last time you did something that impressed yourself?
I just can't put it down. I stare and stare and keep thinking to myself. It just can't be done, I know it can't be done, but there it is. Thanks again Art for not holding back the code. I think, just maybe Art is thinking the same thing, "it just can't be done". It's going to church with me tomorrow. There will be some guys there that will be very impressed! A couple of weeks ago I gave a short talk in which I quoted Art. And said when was the last time you did something that impressed yourself?
Re: Version 2.298 online.
Here, too, until just recently. A good part of Feburary (I know, not spring...) was -20F at night, new outdoor wood boiler was eating a full cord a week.ArtF wrote:Coldest spring I think Ive ever seen.. ..
Although we must just be imagining it, saw recently that so far 2015 is the hottest year on record. :o
Kirk
Re: Version 2.298 online.
The replacement laptop (Lenovo G50-80 with an i5-5200U) came yesterday, with 64 bit Windows 8.1 and a built in webcam (IDs as Lenovo EasyCamera). Using that camera, and 2.2987, I tried a couple different shots, one at 320x240 YUV2. another at 640x480 YUV2, and created stl files from both with a bit under 80K vertices. Both stl files had holes and gave very weird results (top surface all horizontal triangles) with slic3r 1.2.6. Netfabb basic fixed them without any problem and slic3r seemed to work fine. Netfabb's a pretty handy stl file checker and fixer and reorienter, and the basic version is free.
This is on a clean install of essentially everything, only the license file copied from another machine, fwiw.
Still haven't gotten it connected to the Printrbot, so nothing printed yet.
Kirk
This is on a clean install of essentially everything, only the license file copied from another machine, fwiw.
Still haven't gotten it connected to the Printrbot, so nothing printed yet.
Kirk
Re: Version 2.298 online.
Hi Kirk:
Weird, I cant think of why that error is reported, mine are clean. VCarve loaded mine to day and I cut 2 ..
They worked out the best for me yet, Ill post a video and photos soon..
Art
Weird, I cant think of why that error is reported, mine are clean. VCarve loaded mine to day and I cut 2 ..
They worked out the best for me yet, Ill post a video and photos soon..
Art
Re: Version 2.298 online.
Slic3r's particularly picky about stl files with errors in them.ArtF wrote:Weird, I cant think of why that error is reported, mine are clean. VCarve loaded mine to day and I cut 2 ..
They worked out the best for me yet, Ill post a video and photos soon..
I suggest running a few files through netfabb basic; it's hard to beat for stl file checking.
I just tried a couple that I'd made on the quad core W7 desktop, with the LifeCam Cinema. They were error free, so perhaps it's related to using the Lenovo cheap camera. I did another one there, it had one hole. I'll switch to that machine and attach it.
Kirk
Re: Version 2.298 online.
And here it is.
Kirk
Kirk
- Attachments
-
- TestShot20150428.zip
- (3.34 MiB) Downloaded 283 times
Who is online
Users browsing this forum: No registered users and 22 guests