Pin Wheel Escapement
-
- Old Timer
- Posts: 12
- Joined: Fri Mar 04, 2011 10:18 pm
Pin Wheel Escapement
Pin Wheel Escapement for the wish list of Gearotic2.
Re: Pin Wheel Escapement
With a little imagination I make pin wheel escapements with Gearotic as it is. I use the cage function for the pins and fabricate the pallets in another program like Aspire
I?ve made several successful clocks this way including an egg timer
I?ve made several successful clocks this way including an egg timer
1% inspiration 99% try, try again
Re: Pin Wheel Escapement
Here?s a little fun project using a pin wheel escapement created in Gearotic
https://youtu.be/eKnNVsMoA5k
https://youtu.be/eKnNVsMoA5k
1% inspiration 99% try, try again
-
- Old Timer
- Posts: 12
- Joined: Fri Mar 04, 2011 10:18 pm
Re: Pin Wheel Escapement
Yes, with imagination, knowledge and other CAD software outside Gearotic everything can be done, of course, even the gears.
But the suggestion is a feature widely used in hobby watchmakers. If Gearotic has more features then it makes life easier for those who devote themselves to it in a relaxed way as a hobby.
:)
But the suggestion is a feature widely used in hobby watchmakers. If Gearotic has more features then it makes life easier for those who devote themselves to it in a relaxed way as a hobby.
:)
Who is online
Users browsing this forum: No registered users and 20 guests