Page 1 of 1
Inlay done with Auggie, Vexx and Gearotic CAD
Posted: Fri Oct 12, 2018 5:26 am
by BobL
Hi;
Here's the result of a few inlay test examples we come up with over the last few weeks, results are pretty good in my opinion. Thought I'd share with everyone to see.
Cheers
Bob
Re: Inlay done with Auggie, Vexx and Gearotic CAD
Posted: Fri Oct 12, 2018 11:06 am
by John T
Having done some of this inlay work I know the effort required - Congratulations
Re: Inlay done with Auggie, Vexx and Gearotic CAD
Posted: Tue Oct 16, 2018 9:53 pm
by tweakie
Excellent work Bob.
Re: Inlay done with Auggie, Vexx and Gearotic CAD
Posted: Sat Oct 20, 2018 9:14 am
by BobL
Was Art and I actually, but thanks guys.
Cheers
Bob
Re: Inlay done with Auggie, Vexx and Gearotic CAD
Posted: Sat Oct 20, 2018 6:44 pm
by tweakie
Excellent work Bob and Art. ;D
Tweakie.
Re: Inlay done with Auggie, Vexx and Gearotic CAD
Posted: Mon Oct 22, 2018 10:48 pm
by TOTALLYRC
The Zebra inlay is very nice. Maybe when I grow up I will be able to do it as nicely as you have.
Mike
Re: Inlay done with Auggie, Vexx and Gearotic CAD
Posted: Tue Oct 23, 2018 2:26 am
by ArtF
Mike:
Before you get the idea we dealt with tweezers and lots of parts, heres how the Zebra was made.
1) Engrave B&W photo of zebras into wood. 12 minutes.
2) Flip and reverse image and burn into a piece if 1mm veneer to 3/4mm deep ( picture shows result).
3) Apply glue and push veneer into wood. Let dry.
4) Sand away 1/4mm of veneer.
:)
Art