Inlay done with Auggie, Vexx and Gearotic CAD

Useful information on experiences with Lasers
Post Reply
BobL
Global Moderator
Global Moderator
Posts: 466
Joined: Sun Sep 05, 2010 7:18 am

Inlay done with Auggie, Vexx and Gearotic CAD

Post by BobL »

Hi;

Here's the result of a few inlay test examples we come up with over the last few weeks, results are pretty good in my opinion. Thought I'd share with everyone to see.

Cheers
Bob
Attachments
bmwInlay.JPG
Zebra.JPG
Gearotic Motion
Bob
John T
Old Timer
Posts: 447
Joined: Tue Oct 05, 2010 9:53 am

Re: Inlay done with Auggie, Vexx and Gearotic CAD

Post by John T »

Having done some of this inlay work I know the effort required - Congratulations
1% inspiration 99% try, try again
User avatar
tweakie
Old Timer
Posts: 170
Joined: Wed Dec 01, 2010 12:58 am

Re: Inlay done with Auggie, Vexx and Gearotic CAD

Post by tweakie »

Excellent work Bob.
BobL
Global Moderator
Global Moderator
Posts: 466
Joined: Sun Sep 05, 2010 7:18 am

Re: Inlay done with Auggie, Vexx and Gearotic CAD

Post by BobL »

Was Art and I actually, but thanks guys.

Cheers
Bob
Gearotic Motion
Bob
User avatar
tweakie
Old Timer
Posts: 170
Joined: Wed Dec 01, 2010 12:58 am

Re: Inlay done with Auggie, Vexx and Gearotic CAD

Post by tweakie »

Excellent work Bob and Art.  ;D

Tweakie.
TOTALLYRC
Old Timer
Posts: 23
Joined: Tue Jan 02, 2018 3:43 am

Re: Inlay done with Auggie, Vexx and Gearotic CAD

Post by TOTALLYRC »

The Zebra inlay is very nice. Maybe when I grow up I will be able to do it as nicely as you have.


Mike
User avatar
ArtF
Global Moderator
Global Moderator
Posts: 4586
Joined: Sun Sep 05, 2010 6:14 am
Contact:

Re: Inlay done with Auggie, Vexx and Gearotic CAD

Post by ArtF »

Mike:

  Before you get the idea we dealt with tweezers and lots of parts, heres how the Zebra was made.

1) Engrave B&W photo of zebras into wood. 12 minutes.
2) Flip and reverse image and burn into a piece if 1mm veneer to 3/4mm deep ( picture shows result).
3) Apply glue and push veneer into wood. Let dry.
4) Sand away 1/4mm of veneer.

:)
Art
Attachments
Zebra.jpg
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests