Another clock

Useful information on experiences with Lasers
Post Reply
Dan Mauch
Old Timer
Posts: 117
Joined: Tue Oct 04, 2016 2:44 pm

Another clock

Post by Dan Mauch »

This piece was somewhat difficult because of all the tight curves. The yellow inserts were also a bit difficult because they are so small and again the many close curves that thin out the parts that hold them together. I just need the clock hand to finish it.
Dan Mauch
Attachments
floralflourish16inch.JPG
Last edited by Anonymous on Fri May 05, 2017 6:50 am, edited 1 time in total.
BobL
Global Moderator
Global Moderator
Posts: 466
Joined: Sun Sep 05, 2010 7:18 am

Re: Another clock

Post by BobL »

Nicely done Dan...


Cheers
Bob
:)
Gearotic Motion
Bob
User avatar
ArtF
Global Moderator
Global Moderator
Posts: 4586
Joined: Sun Sep 05, 2010 6:14 am
Contact:

Re: Another clock

Post by ArtF »

Good fitting on the pieces..  you have the kerf calcs down pat. Nice..

Art
Dan Mauch
Old Timer
Posts: 117
Joined: Tue Oct 04, 2016 2:44 pm

Re: Another clock

Post by Dan Mauch »

Thanks. Indeed  having the kerf cals down is the key. But what really helps is also that after  designing the first section then making 11 exact copies for the array to fill the pattern makes it easier so that all the inlays are then identical after the offset for the kerf is applied.


Dan Mauch
ArtF wrote: Good fitting on the pieces..  you have the kerf calcs down pat. Nice..

Art
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests