Building a multipurpose machine what do I need to control it?

Any questions related to machine operation
User avatar
ArtF
Global Moderator
Global Moderator
Posts: 4586
Joined: Sun Sep 05, 2010 6:14 am
Contact:

Re: Building a multipurpose machine what do I need to control it?

Post by ArtF »

Awesome!, good start. :)

Art
TOTALLYRC
Old Timer
Posts: 23
Joined: Tue Jan 02, 2018 3:43 am

Re: Building a multipurpose machine what do I need to control it?

Post by TOTALLYRC »

Todays question;
What king of axis speed should I be shooting for?
I am thinking that 300 IPM should be more than fast enough but I would like the skinny from the experienced laser users.


Mike
User avatar
ArtF
Global Moderator
Global Moderator
Posts: 4586
Joined: Sun Sep 05, 2010 6:14 am
Contact:

Re: Building a multipurpose machine what do I need to control it?

Post by ArtF »

Hi Mike:

  On my fastest settings for photos and such I use up to 600IPM or 15000mm/m.
Typically, I dont use full speed, but there are times I use the full 15000. This is with a
14 watt synrad co2. WIth a 40watt Id probably use the higher end more often.
  This of course will vary from machine to machine, mines a pretty heavy robotic arm.

  Jerk settings will help usually. Just in case youve never watched this video..

    https://www.youtube.com/watch?v=s7lWyoAfU9I

It shows the jerk settings on my 14watt laser, and gives an idea about speed.

Art


 
TOTALLYRC
Old Timer
Posts: 23
Joined: Tue Jan 02, 2018 3:43 am

Re: Building a multipurpose machine what do I need to control it?

Post by TOTALLYRC »

Only the last two settings got anywhere near the 1180 ipm.
I will shoot for as fast as I can go without resorting to anything silly.

Mike
TOTALLYRC
Old Timer
Posts: 23
Joined: Tue Jan 02, 2018 3:43 am

Re: Building a multipurpose machine what do I need to control it?

Post by TOTALLYRC »

Hi Guys,
When I do a build log should I just continue here or is there a better place.

Mike
User avatar
ArtF
Global Moderator
Global Moderator
Posts: 4586
Joined: Sun Sep 05, 2010 6:14 am
Contact:

Re: Building a multipurpose machine what do I need to control it?

Post by ArtF »

Here is as good a place as any. :)

Art
TOTALLYRC
Old Timer
Posts: 23
Joined: Tue Jan 02, 2018 3:43 am

Re: Building a multipurpose machine what do I need to control it?

Post by TOTALLYRC »

Hi All,
Not much new to report. I am cleaning and rearranging the shop to make room for the machine to have a home.

Updates to follow.

Mike
TOTALLYRC
Old Timer
Posts: 23
Joined: Tue Jan 02, 2018 3:43 am

Re: Building a multipurpose machine what do I need to control it?

Post by TOTALLYRC »

Time for a quick update.

I picked up a piece of 80/20 for the cross beam and have piled up all the collected parts in one spot.
Now that the most of the other life problems have been straightened out, it looks like I will have time to make the side plates.

More to come.


Mike
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests