Auggie+PoKeys works unstable
Re: Auggie+PoKeys works unstable
A:
Auggie only uses a 4-axis planner for the first 4 motors, and another planner for up to 4 of the remaining.
You can command them to move, but they will not show up in the toolpath, they were meant for things like
a toolchanger, or a pallet ..etc.. so they werent planned into the task space of the first 4 axis.
So you cannot sync them, but can move them at the same time. One of the videos shows the use of the
upper 4 axis.. if you use laser one of them is reserved for the laser control..
Art
Auggie only uses a 4-axis planner for the first 4 motors, and another planner for up to 4 of the remaining.
You can command them to move, but they will not show up in the toolpath, they were meant for things like
a toolchanger, or a pallet ..etc.. so they werent planned into the task space of the first 4 axis.
So you cannot sync them, but can move them at the same time. One of the videos shows the use of the
upper 4 axis.. if you use laser one of them is reserved for the laser control..
Art
Re: Auggie+PoKeys works unstable
Hi Art,
using Mach3 I made 5 axis Plasma cutting machine you can see it on youtube https://www.youtube.com/watch?v=tBLdmKk9A84
This class machines need 5-axis planner and 2 axis toolpass. Next is weldin CNC. It need 5-axis planner too.
Is it possible give Auggie a 5-axis planner?
Best regards,
Anatolii.
using Mach3 I made 5 axis Plasma cutting machine you can see it on youtube https://www.youtube.com/watch?v=tBLdmKk9A84
This class machines need 5-axis planner and 2 axis toolpass. Next is weldin CNC. It need 5-axis planner too.
Is it possible give Auggie a 5-axis planner?
Best regards,
Anatolii.
Re: Auggie+PoKeys works unstable
Anatolii:
Nice machine. Looks very capable.
I dont think I want to add a 5th or 6th axis into Auggie, perhaps some day if I ever have to deal in 5th axis,
but it would be far too much work I think. :)
Art
Nice machine. Looks very capable.
I dont think I want to add a 5th or 6th axis into Auggie, perhaps some day if I ever have to deal in 5th axis,
but it would be far too much work I think. :)
Art
Re: Auggie+PoKeys works unstable
So we start waiting this day ::)
Re: Auggie+PoKeys works unstable
You could just write new MCodes to move the bevel axis when you need to.. Say M45 for tilting 45 degree's of use an MCode with a parameter.. that
may work as well..
Art
may work as well..
Art
Re: Auggie+PoKeys works unstable
Hi Art,
In added file NC program for cutting circle dia 40mm. It has two parts:
- vertically cutting,
- beveling 45 degree.
How do you see using M45 command in this situation?
A,B corners continuously vary during piercing, leadin, leadout, ets...
Is it very hard to add B axis to G00, G01, G02 and G03 command as linear interpolation?
Best regards,
Anatolii.
In added file NC program for cutting circle dia 40mm. It has two parts:
- vertically cutting,
- beveling 45 degree.
How do you see using M45 command in this situation?
A,B corners continuously vary during piercing, leadin, leadout, ets...
Is it very hard to add B axis to G00, G01, G02 and G03 command as linear interpolation?
Best regards,
Anatolii.
- Attachments
-
[The extension has been deactivated and can no longer be displayed.]
Re: Auggie+PoKeys works unstable
Anatolli:
Ahh, I see what you mean, if you do a radial corner you'd need the axis in the planner, and your right,
there is no way to do that. Its part of my design criterion that I stay away from adding a 5th axis, while
Auggie is a 9 axis planner internally, the complexity added as you add axis' increases the work to make it all
go by quite a bit.
You could use an M45 for example to turn the torch for a square cutout with sharp corners as you can tilt
the torch on its own, but a radial blend will not be possible in the foreseeable future.
If one needs 5th axis, I recommend Mach3 or 4, Im trying to keep Auggie at a bit of a lower level, more
for hobbiests, most of whom do not yet require a 5th axis in the planner, though Auggie will support 4 axis
above the x,y,z,a , the other four axis cannot be a planned move synced to the first 4.
Sorry for the limitation, but its a question of limited time and resources, keeping Auggie to 4 axis keeps its
support and problems low. (and keeps me sane...well, as sane as I get..)
Art
Ahh, I see what you mean, if you do a radial corner you'd need the axis in the planner, and your right,
there is no way to do that. Its part of my design criterion that I stay away from adding a 5th axis, while
Auggie is a 9 axis planner internally, the complexity added as you add axis' increases the work to make it all
go by quite a bit.
You could use an M45 for example to turn the torch for a square cutout with sharp corners as you can tilt
the torch on its own, but a radial blend will not be possible in the foreseeable future.
If one needs 5th axis, I recommend Mach3 or 4, Im trying to keep Auggie at a bit of a lower level, more
for hobbiests, most of whom do not yet require a 5th axis in the planner, though Auggie will support 4 axis
above the x,y,z,a , the other four axis cannot be a planned move synced to the first 4.
Sorry for the limitation, but its a question of limited time and resources, keeping Auggie to 4 axis keeps its
support and problems low. (and keeps me sane...well, as sane as I get..)
Art
Re: Auggie+PoKeys works unstable
Hi Art,
I am very glad that ..."Auggie is a 9 axis planner internally"...!!!
Your Hobbyists don't ask you more than 4 axis, because they don't know - Auggie can 9...
May be if you declare your needs in resources we can help you to find it. :)
Best regards,
Anatolii.
I am very glad that ..."Auggie is a 9 axis planner internally"...!!!
Your Hobbyists don't ask you more than 4 axis, because they don't know - Auggie can 9...
May be if you declare your needs in resources we can help you to find it. :)
Best regards,
Anatolii.
Re: Auggie+PoKeys works unstable
>>May be if you declare your needs in resources we can help you to find it. Smiley
Let me know when you come across the fountain of youth.. :)
Art
Let me know when you come across the fountain of youth.. :)
Art
Re: Auggie+PoKeys works unstable
Hi Art,
I usually use dreams as "Rejuvenating pills ". It is a very effective tools. ;)
Best regards,
Anatolii.
I usually use dreams as "Rejuvenating pills ". It is a very effective tools. ;)
Best regards,
Anatolii.
Re: Auggie+PoKeys works unstable
>>I usually use dreams as "Rejuvenat ing pills ". It is a very effective tools
Dreams? lol, Dreams are my problem, too many of them and too little time.
Art
Dreams? lol, Dreams are my problem, too many of them and too little time.
Art
Re: Auggie+PoKeys works unstable
Hi Air,
sometimes it is a really problem...
Can I move free axis independently in different scripts? In Free Feed To(1,2,3,4); all four axis move simultaneously, or give error in case FreeFeedTo(,,,4);
Best regards,
Anatolii.
sometimes it is a really problem...
Can I move free axis independently in different scripts? In Free Feed To(1,2,3,4); all four axis move simultaneously, or give error in case FreeFeedTo(,,,4);
Best regards,
Anatolii.
Re: Auggie+PoKeys works unstable
Anatoli:
Yes, use FreeFeedTo(NULL,NULL,NULL,4);
Art
Yes, use FreeFeedTo(NULL,NULL,NULL,4);
Art
Re: Auggie+PoKeys works unstable
Hi Art,
I have enter one line:
FreeFeedTo(1,NULL,NULL,NULL);
push "run"
-first go1
then change it to
FreeFeedTo(NULL,NULL,NULL,4);
push "run"
-fourth go 4
All ok.
Then I enter four line:
FreeFeedTo(1,NULL,NULL,NULL);
FreeFeedTo(NULL,2,NULL,NULL);
FreeFeedTo(null,null,3,null);
FreeFeedTo(null,null,null,4);
push "run"
They work one after another, not parallel:
-first go 1
-first go 0, second go 2
-second go 0, three go 3
-third go 0, fourth go 4
Is it right?
Best regards,
Anatolii
I have enter one line:
FreeFeedTo(1,NULL,NULL,NULL);
push "run"
-first go1
then change it to
FreeFeedTo(NULL,NULL,NULL,4);
push "run"
-fourth go 4
All ok.
Then I enter four line:
FreeFeedTo(1,NULL,NULL,NULL);
FreeFeedTo(NULL,2,NULL,NULL);
FreeFeedTo(null,null,3,null);
FreeFeedTo(null,null,null,4);
push "run"
They work one after another, not parallel:
-first go 1
-first go 0, second go 2
-second go 0, three go 3
-third go 0, fourth go 4
Is it right?
Best regards,
Anatolii
Re: Auggie+PoKeys works unstable
Anatoli:
Yes, correct. If you wish two to move together, use
FreeFeed( NULL, a, b, NULL ); for example.. generally, whatever is null will be ignored.
Art
Yes, correct. If you wish two to move together, use
FreeFeed( NULL, a, b, NULL ); for example.. generally, whatever is null will be ignored.
Art
Who is online
Users browsing this forum: No registered users and 27 guests