GearHeads Corner

General Category => Laser Stories => Topic started by: BobL on October 12, 2018, 11:26:17 AM



Title: Inlay done with Auggie, Vexx and Gearotic CAD
Post by: BobL on October 12, 2018, 11:26:17 AM
Hi;
 
 Here's the result of a few inlay test examples we come up with over the last few weeks, results are pretty good in my opinion. Thought I'd share with everyone to see.

Cheers
Bob


Title: Re: Inlay done with Auggie, Vexx and Gearotic CAD
Post by: John T on October 12, 2018, 05:06:58 PM
Having done some of this inlay work I know the effort required - Congratul ations


Title: Re: Inlay done with Auggie, Vexx and Gearotic CAD
Post by: tweakie on October 17, 2018, 03:53:21 AM
Excellent work Bob.


Title: Re: Inlay done with Auggie, Vexx and Gearotic CAD
Post by: BobL on October 20, 2018, 03:14:37 PM
Was Art and I actually, but thanks guys.

Cheers
Bob


Title: Re: Inlay done with Auggie, Vexx and Gearotic CAD
Post by: tweakie on October 21, 2018, 12:44:21 AM
Excellent work Bob and Art.  ;D

Tweakie.


Title: Re: Inlay done with Auggie, Vexx and Gearotic CAD
Post by: TOTALLYRC on October 23, 2018, 04:48:01 AM
The Zebra inlay is very nice. Maybe when I grow up I will be able to do it as nicely as you have.


Mike


Title: Re: Inlay done with Auggie, Vexx and Gearotic CAD
Post by: ArtF on October 23, 2018, 08:26:21 AM
Mike:

   Before you get the idea we dealt with tweezers and lots of parts, heres how the Zebra was made.

1) Engrave B&W photo of zebras into wood. 12 minutes.
2) Flip and reverse image and burn into a piece if 1mm veneer to 3/4mm deep ( picture shows result).
3) Apply glue and push veneer into wood. Let dry.
4) Sand away 1/4mm of veneer.

:)
Art